Enablement & Platform

AI readiness for machine builders: the data you need before predictive maintenance

Predictive maintenance pilots often stall because the basics are missing: which machine, which parts, which failures. The data layers AI needs, a readiness check, and use cases that work with the data most OEMs already have.

Not ready to talk yet? Take the 3-minute Data Foundation Check

Illustrative01Cleanmaster dataone part, one record02LinkedBOMs + historyper serial number03Governed& versionedowners and rules04AI usecasesforecast, search

TL;DR

  • Sensor data alone predicts nothing. You need to know which machine, which parts and which failures happened when.
  • Four data layers: asset master, failure history, parts data, sensor data. Most OEMs are weakest in failure history.
  • Start with use cases that need clean master data but no sensors: AI parts search, parts identification, failure-code suggestions.
  • Predictive maintenance makes sense once failure history per component is clean and linked to the machine.
For:Digital & IoT teamsHead of ServiceData & ITProduct management

Which data layers does AI need?

DATA LAYERS FOR INDUSTRIAL AIAsset masterSerial, as-built,site, customerFailure historyService orders,failure codes,replaced partsParts dataClassified,supersessions, BOMlinksSensor dataSignals linked toserial andcomponentUse caseSearch, diagnosis,prediction
LayerQuestion it answersTypical gap
Asset masterWhich machine is this, and what’s inside?No as-built, wrong site
Failure historyWhat broke, when and why?Free-text reports, “other” as failure code
Parts dataWhich part fixes it?Unclassified parts, no supersession
Sensor dataWhat was the machine doing before?Signals not linked to component or serial

How ready are you?

AI READINESS BY DATA LAYERAsset master62%Failure history31%Parts data48%Sensor data55%Illustrative. Failure history is usually the weakest layer.
Asset master     ≥ 90% of active machines with serial, site and as-built
Failure history  ≥ 80% of service orders with structured failure code
                 and replaced part numbers
Parts data       service parts classified, supersessions structured
Sensor data      signals mapped to serial and component, consistent timestamps

Predictive maintenance pilot: all four layers above threshold for one machine type

Labels matter more than algorithms

A model learns failures from labelled history. If half the service reports say “other”, the model learns noise. Fixing failure codes and parts on service orders is less exciting than a model, and far more useful.

Which use cases work with today’s data?

Use caseNeedsSensors?
AI parts search (text or photo)Classified parts, images, supersessionsNo
Parts identification by serialAs-built, service BOMNo
Failure-code suggestion for techniciansClean failure historyNo
Spare parts demand forecastInstalled base, consumption historyNo
Predictive maintenanceAll four layers, clean labelsYes

Where should you start?

  1. Pick one machine type with many units in the field and decent service history.
  2. Clean the asset master and link service orders to serial numbers.
  3. Introduce a short failure code list and capture replaced parts on every order.
  4. Start a no-sensor use case that shows value within months.
  5. Add sensor data for the components that fail most, once labels exist.

Checklist

  • Active machines with serial, site and as-built
  • Service orders linked to serial numbers
  • Structured failure codes in use
  • Replaced parts captured on service orders
  • Sensor signals mapped to component and serial

FAQ

What data is needed for predictive maintenance?

An asset master with as-built per serial, a clean failure and service history with replaced parts, structured parts data, and sensor signals linked to machine and component.

Why do predictive maintenance pilots fail?

Often because the failure history is too poor to learn from: missing failure codes, service orders not linked to machines, and no record of which parts were replaced.

Which AI use cases work without sensor data?

AI-assisted parts search and identification, failure-code suggestions for technicians, and spare parts demand forecasting, all based on clean master and service data.

What is an asset master?

A record of each machine in the field with its serial number, configuration, as-built parts, location and owner. It anchors every other data layer.

Where should a machine builder start with AI?

With one machine type, a clean asset master and structured service history, plus a use case that delivers value without sensors. Predictive maintenance comes after.

How ready is your data for AI?

Send us machine and service data for one machine type under NDA. We’ll return a readiness score per data layer and the first use case that fits.

Similar Posts