Aftermarket & Service

Service contract and warranty analytics: attach rate, renewals and cost drivers

Service contracts are the most predictable revenue an OEM has, and warranty is often its least understood cost. The KPIs, the data and the analyses that move both.

Not ready to talk yet? Take the 3-minute Aftermarket Revenue Check

Illustrative61%attach rateUnder contractattach rate61%Expiredrenewal chance24%Never coveredno agreement yet15%

TL;DR

  • Attach rate = machines sold with a contract ÷ machines sold. Measure it per machine type, region and channel.
  • Renewals are decided long before the end date. Usage, response times and parts orders are early warnings.
  • Warranty cost has few real drivers. A Pareto by part, failure mode and supplier usually shows a short list.
  • Feed warranty findings back to engineering and suppliers, or you pay for the same failure every year.
For:Head of ServiceService contract managementQuality & warrantyControlling

Which KPIs matter?

KPIDefinitionWhy it matters
Attach rateMachines sold with a contract ÷ machines soldShare of new machines you secure for service
Coverage rateActive machines under contract ÷ active installed baseHow much of the field you really serve
Renewal rateContracts renewed ÷ contracts dueStability of recurring revenue
Warranty cost per machineWarranty cost ÷ machines in warrantyQuality signal per machine type
Recovery rateRecovered from suppliers ÷ supplier-caused costMoney left on the table
Attach rate         = machines sold with contract ÷ machines sold (period)
Coverage rate       = active machines under contract ÷ active installed base
Warranty cost/unit  = (parts + labour + travel) ÷ machines in warranty
Recovery rate       = recovered from suppliers ÷ supplier-caused warranty cost

How do you predict renewals?

Most contracts that won’t be renewed show it months in advance. A simple score on a few signals is usually enough to tell service sales whom to call first.

CHURN RISK SIGNALS, WEIGHT IN SCOREFewer service calls than planned25%Slow response in last 6 months20%Parts bought elsewhere20%Machine near end of life15%Contact person changed10%Price increase at last renewal10%Illustrative weights. Calibrate on your own renewal history.

Where does warranty cost come from?

WARRANTY COST BY PARTSpindle cartridge31%Hydraulic unit18%Control PCB14%Cooling fan9%Door interlock6%Others (140 parts)22%Illustrative. Three parts drive 63% of warranty cost.
  1. Clean the claims. One record per claim with serial number, part, failure code and cost split (parts, labour, travel).
  2. Link to the as-built record: which part revision and supplier were in that serial number.
  3. Run a Pareto by part, failure mode, supplier and build month.
  4. Check time to failure. Early failures point to production or supplier quality, late ones to design or wear.
  5. Recover from suppliers where contracts allow, and send design issues to engineering.

Failure codes decide the quality of the analysis

If technicians pick “other” in half the claims, no analysis will help. A short, well-defined failure code list with examples is worth more than a long one nobody uses.

What actions follow?

  • Put a contract option into every machine quote, ticked by default.
  • Call the top 20% churn-risk contracts three to six months before renewal.
  • Run a supplier review on the top warranty parts with the cost data in hand.
  • Report warranty cost per machine type to product management every month.

Checklist

  • Contracts linked to serial numbers
  • Warranty claims with serial, part, failure code and cost split
  • As-built or at least BOM revision per serial
  • Renewal history for 2–3 years
  • Supplier contracts with warranty recovery terms

FAQ

What is a service contract attach rate?

The share of newly sold machines that are sold with a service contract: machines sold with a contract divided by all machines sold in the period.

How can we predict service contract renewals?

Score contracts on early signals such as falling use of the contract, slow response times, parts bought elsewhere, machine age and a change of contact person. Calibrate the weights on past renewals.

What drives warranty cost in machine building?

Usually a short list of parts and failure modes. A Pareto by part, failure code, supplier and build month typically shows that a few items cause most of the cost.

How can warranty costs be recovered from suppliers?

Link each claim to the part revision and supplier from the as-built record, document the failure and claim under the warranty terms of the supplier contract.

What is the difference between attach rate and coverage rate?

Attach rate looks at new machine sales in a period. Coverage rate looks at the whole active installed base and the share of it under contract.

How much of your installed base is under contract?

Send us contract, warranty and machine data under NDA. We’ll return attach, coverage and renewal-risk figures plus your top warranty drivers.

Similar Posts