Technical data enrichment for spare parts: images, specs, CAD and where-used
A part number without a picture, dimensions or a list of machines it fits is hard to sell and easy to order wrong. What to enrich first, where the data comes from and how to measure completeness.
Not ready to talk yet? Take the 3-minute Data Foundation Check
TL;DR
- Customers and technicians identify parts by looking at them and checking where they fit. Give them images, key dimensions and where-used.
- Enrich in order of value: top-selling spare parts and parts with frequent wrong orders first.
- Most of the data already exists: CAD, drawings, supplier catalogues, service manuals. The job is to connect it.
- Track a completeness score per part and per machine type. Don’t publish parts in the portal below a threshold.
What does an enriched spare part contain?
| Element | Why it matters | Typical source |
|---|---|---|
| Image (photo or CAD render) | Visual identification, fewer wrong orders | CAD export, photo station |
| Key dimensions and attributes | Filtering, comparing, matching | Classification, drawing, supplier data |
| Where-used | “Does it fit my machine?” | BOMs, as-built per serial |
| Exploded-view position | Find the part from the machine | Service documentation, catalogue authoring |
| Documents | Installation, safety, data sheets | Technical documentation |
| Supersession and kits | Ordering the right current part | Part master, service BOM |
Where should you start?
- Top spare parts by revenue and order lines
- Parts with frequent returns or wrong deliveries
- Parts customers search for in the portal but don’t find
- Everything that goes into the next catalogue release
Where does the data come from?
CAD renders beat photo shoots
For manufactured parts, automated renders from the CAD model are faster and more consistent than photographing every part. Keep photos for purchased parts and anything where colour or labels matter.
A completeness score
Completeness (0–100) per part = 25 × image present + 25 × all key attributes filled (per class) + 20 × where-used to at least one machine type + 15 × exploded-view position + 15 × supersession status checked Publish in the parts portal if ≥ 75
How do you keep it complete?
- Make enrichment part of the new-part release, not a later catalogue project.
- Show completeness per machine type to product management, not only per part.
- Feed portal search logs back: parts that are searched but not found point to missing attributes.
- Re-render images automatically when the CAD model changes.
Checklist
- Top spare parts list agreed between service and sales
- Key attributes defined per class
- CAD renders or photos for the top parts
- Where-used available per part
- Completeness score visible per part and machine type
FAQ
What is spare parts data enrichment?
Adding the technical information customers and technicians need to identify and order a part: images, dimensions, attributes, documents, where-used and supersession status.
Which parts should be enriched first?
Start with the spare parts that drive most revenue and order lines, then parts with frequent wrong orders or returns.
Can CAD data be used for spare part images?
Yes. Automated renders from CAD models are a fast and consistent way to create images for manufactured parts. For purchased parts, supplier images or photos often work better.
What is BMEcat?
BMEcat is an XML standard for exchanging electronic product catalogues, widely used in German-speaking markets. Many suppliers can deliver product data in BMEcat, often with ETIM or eCl@ss classification.
How do we measure data completeness?
Define the required elements per part class, score each part, and report the score per part group and machine type. Set a minimum score for publishing in the parts portal.
How complete is your spare parts data?
Send us your top 500 spare parts under NDA. We’ll score completeness and show where the missing data already exists.





